Goma Xantana Xc Polymer Oil Drilling Grade (DE PRE D)

• Customization: Available
• CAS No.: 11138-66-2
• Formula: C35h49o29
• Model NO.: DE PRE D
• Color: Light Yellow to White
• Appearance: Powder
• OEM: Yes
• Raw Material: Corn Starch
• Mesh: 40/80 Mesh
• Grade: Oil Drilling Grade
• Certificates: SGS, CIQ
• Transport Package: 25kg Craft Paper Bag
• Specification: 100%
• Trademark: Doeast
• Origin: China
• HS Code: 3913900
• Production Capacity: 10, 000mt Per Year

Product Description

It is specially produced as mud additive for oil drilling and expoitation. Being an environment friendly and high efficiency mud additive, it has an excellent tolerance to the changes of temperature, acid, alkaline and salt. Meanwhile, it can extremely increase the products penetrating ability and suspending performance to small solid materials, and reduce the pressure loss during drilling. This xanthan gum cannot only fasten the well bore, but decrease the damage to oil formation. It can also greatly raise the efficiency of drilling, workover and completion. As a biotype oil driver, it can improve oil extraction rate and utilization factor of natural resources. The more important point is that it can furthest protect natural environment.
 
SPECIFICATIONS

Item	Standard
Appearance	Cream Colored Free Flowing Powder
Particle Size	40/80 Mesh
Loss On Drying	6-14%
Ph (1% Solution)	6.0-8.0
Ash	Less Than 10%
Viscosity (1% KCl solution, cps)	1200 min
Rheological Properties (1 Ppb in Seawater. Measurments Taken Using Fan 35, 0.2 spring)
600 Rpm	Not Less Than 100
300 Rpm	Not Less Than 80
200 Rpm	Not Less Than 65
100 Rpm	Not Less Than 50
6 Rpm	Not Less Than 22
3 Rpm	Not Less Than 20

                                                    
PACKAGE, STORAGE & CAUTION
Packed in paper bag with PE liner inside and 25kg net each.
Stored in the original drums or bags under the conditions of dry and below 25oC, a shelf life of at least 15 months will be achieved.
To be added slowly through the hopper at maximum shear to avoid lumping and to minimize waste, the appropriate adding ratio should be 0.3-1.2%.

SAFETY
Avoid contacting with eyes, skin and clothing. Otherwise, wash with a flush of water. Refer to Material Safety Data Sheet (MSDS) for complete handling and hazard data.